Show/Hide
Supermicro X7SB4 GENERIC
Monday, March 10th, 2008 at 5:50:07am MDT

This URL: http://pastebin.ca/936377
Alternatives: Raw
Language: Script Log
Age: 20 hrs 49 mins
  1. Copyright (c) 1992-2008 The FreeBSD Project.
  2. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  3. The Regents of the University of California. All rights reserved.
  4. FreeBSD is a registered trademark of The FreeBSD Foundation.
  5. FreeBSD 7.0-STABLE #0: Mon Mar 10 10:26:30 CET 2008
  6. root@cad.lecad.uni-lj.si:/usr/src/sys/i386/compile/GENERIC
  7. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d88000.
  8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d881f8.
  9. Calibrating clock(s) ... i8254 clock: 1193214 Hz
  10. CLK_USE_I8254_CALIBRATION not specified - using default frequency
  11. Timecounter "i8254" frequency 1193182 Hz quality 0
  12. Calibrating TSC clock ... TSC clock: 2660009400 Hz
  13. CPU: Intel(R) Xeon(R) CPU            3070  @ 2.66GHz (2660.01-MHz 686-class CPU)
  14. Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  15. Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  16. Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  17. AMD Features=0x20100000<NX,LM>
  18. AMD Features2=0x1<LAHF>
  19. Cores per package: 2
  21. Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
  22. 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
  23. 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
  24. L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
  25. real memory  = 3488022528 (3326 MB)
  26. Physical memory chunk(s):
  27. 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
  28. 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
  29. 0x0000000001028000 - 0x00000000cc39cfff, 3409399808 bytes (832373 pages)
  30. avail memory = 3408842752 (3250 MB)
  31. Table '_MAR' at 0xcfe82da8
  32. Table 'FACP' at 0xcfe82dd8
  33. Table 'MCFG' at 0xcfe82ecc
  34. Table 'APIC' at 0xcfe82f08
  35. MADT: Found table at 0xcfe82f08
  36. MP Configuration Table version 1.4 found at 0xc009dc71
  37. APIC: Using the MADT enumerator.
  38. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
  39. SMP: Added CPU 0 (AP)
  40. MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
  41. SMP: Added CPU 1 (AP)
  42. ACPI APIC Table: <PTLTD          APIC  >
  43. INTR: Adding local APIC 1 as a target
  44. FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  45. cpu0 (BSP): APIC ID:  0
  46. cpu1 (AP): APIC ID:  1
  47. bios32: Found BIOS32 Service Directory header at 0xc00f6a80
  48. bios32: Entry = 0xfdb40 (c00fdb40)  Rev = 0  Len = 1
  49. pcibios: PCI BIOS entry at 0xfdb40+0x23f
  50. pnpbios: Found PnP BIOS data at 0xc00f6b20
  51. pnpbios: Entry = f0000:b84e  Rev = 1.0
  52. Other BIOS signatures found:
  53. APIC: CPU 0 has ACPI ID 0
  54. APIC: CPU 1 has ACPI ID 1
  55. ACPI: RSDP @ 0x0xf6ad0/0x0024 (v  2 PTLTD )
  56. ACPI: XSDT @ 0x0xcfe798a8/0x005C (v  1 PTLTD          XSDT   0x06040000  LTP 0x00000000)
  57. ACPI: _MAR @ 0x0xcfe82da8/0x0030 (v  1 Intel  OEMDMAR  0x06040000 LOHR 0x00000001)
  58. ACPI: FACP @ 0x0xcfe82dd8/0x00F4 (v  3 INTEL           0x06040000 PTL  0x00000002)
  59. ACPI: DSDT @ 0x0xcfe7c8e4/0x6450 (v  1  INTEL BEARLAKE 0x06040000 MSFT 0x02000001)
  60. ACPI: FACS @ 0x0xcfe85fc0/0x0040
  61. ACPI: MCFG @ 0x0xcfe82ecc/0x003C (v  1 PTLTD    MCFG   0x06040000  LTP 0x00000000)
  62. ACPI: APIC @ 0x0xcfe82f08/0x0080 (v  1 PTLTD          APIC   0x06040000  LTP 0x00000000)
  63. ACPI: BOOT @ 0x0xcfe82f88/0x0028 (v  1 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001)
  64. ACPI: SPCR @ 0x0xcfe82fb0/0x0050 (v  1 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001)
  65. ACPI: SSDT @ 0x0xcfe79904/0x1405 (v  1  PmRef    CpuPm 0x00003000 INTL 0x20050228)
  66. MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
  67. ioapic0: Routing external 8259A's -> intpin 0
  68. MADT: Found IO APIC ID 3, Interrupt 24 at 0xfecc0000
  69. MADT: Found IO APIC ID 4, Interrupt 48 at 0xfecc0400
  70. lapic0: Routing NMI -> LINT1
  71. lapic0: LINT1 trigger: edge
  72. lapic0: LINT1 polarity: high
  73. lapic1: Routing NMI -> LINT1
  74. lapic1: LINT1 trigger: edge
  75. lapic1: LINT1 polarity: high
  76. MADT: Interrupt override: source 0, irq 2
  77. ioapic0: Routing IRQ 0 -> intpin 2
  78. MADT: Interrupt override: source 9, irq 9
  79. ioapic0: intpin 9 trigger: level
  80. ioapic0 <Version 2.0> irqs 0-23 on motherboard
  81. ioapic1 <Version 2.0> irqs 24-47 on motherboard
  82. ioapic2 <Version 2.0> irqs 48-71 on motherboard
  83. cpu0 BSP:
  84. ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  85. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  86. timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000
  87. wlan: <802.11 Link Layer>
  88. ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
  89. wlan_amrr: <AMRR Transmit Rate Control Algorithm>
  90. random: <entropy source, Software, Yarrow>
  91. nfslock: pseudo-device
  92. kbd: new array size 4
  93. kbd1 at kbdmux0
  94. io: <I/O>
  95. mem: <memory>
  96. Pentium Pro MTRR support enabled
  97. null: <null device, zero device>
  98. ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
  99. hptrr: HPT RocketRAID controller driver v1.1 (Mar 10 2008 10:26:19)
  100. npx0: INT 16 interface
  101. acpi0: <PTLTD         XSDT> on motherboard
  102. ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
  103. acpi0: [MPSAFE]
  104. acpi0: [ITHREAD]
  105. acpi0: Power Button (fixed)
  106. acpi0: wakeup code va 0xda71d000 pa 0x1000
  107. pci_open(1):        mode 1 addr port (0x0cf8) is 0x80021800
  108. pci_open(1a):        mode1res=0x80000000 (0x80000000)
  109. pci_cfgcheck:        device 0 [class=060000] [hdr=00] is there (id=29f08086)
  110. pcibios: BIOS version 3.00
  111. AcpiOsDerivePciId: \_SB_.PCI0.REGS -> bus 0 dev 0 func 0
  112. AcpiOsDerivePciId: \_SB_.PCI0.IGD0.IGDP -> bus 0 dev 2 func 0
  113. AcpiOsDerivePciId: \_SB_.PCI0.LPC0.REGS -> bus 0 dev 31 func 0
  114. AcpiOsDerivePciId: \_SB_.PCI0.LPC0.PIRX -> bus 0 dev 31 func 0
  115. AcpiOsDerivePciId: \_SB_.PCI0.LPC0.PIRY -> bus 0 dev 31 func 0
  116. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  117. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  118. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  119. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  120. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  121. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  122. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  123. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  124. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  125. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  126. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  127. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  128. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  129. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  130. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  131. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  132. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  133. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  134. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  135. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  136. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  137. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  138. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  139. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  140. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  141. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  142. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  143. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  144. ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
  145. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  146. acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
  147. pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  148. Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
  149. Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
  150. After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  151. pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  152. Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  153. Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  154. After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  155. pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  156. Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
  157. Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
  158. After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  159. pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  160. Initial Probe       0   12   N     0  3 4 5 6 7 10 11 12 14 15
  161. Validation          0   12   N     0  3 4 5 6 7 10 11 12 14 15
  162. After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  163. pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  164. Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  165. Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  166. After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  167. pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  168. Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  169. Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  170. After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  171. pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  172. Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  173. Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  174. After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  175. pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  176. Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  177. Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  178. After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  179. cpu0: <ACPI CPU> on acpi0
  180. ACPI: SSDT @ 0x0xcfe7ad09/0x021F (v  1  PmRef  Cpu0Ist 0x00003000 INTL 0x20050228)
  181. cpu0: switching to generic Cx mode
  182. est0: <Enhanced SpeedStep Frequency Control> on cpu0
  183. p4tcc0: <CPU Frequency Thermal Control> on cpu0
  184. cpu1: <ACPI CPU> on acpi0
  185. ACPI: SSDT @ 0x0xcfe7af28/0x01B0 (v  1  PmRef  Cpu1Ist 0x00003000 INTL 0x20050228)
  186. est1: <Enhanced SpeedStep Frequency Control> on cpu1
  187. p4tcc1: <CPU Frequency Thermal Control> on cpu1
  188. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  189. pci0: <ACPI PCI bus> on pcib0
  190. pci0: domain=0, physical bus=0
  191. found->        vendor=0x8086, dev=0x29f0, revid=0x01
  192. domain=0, bus=0, slot=0, func=0
  193. class=06-00-00, hdrtype=0x00, mfdev=0
  194. cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
  195. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  196. found->        vendor=0x8086, dev=0x29f1, revid=0x01
  197. domain=0, bus=0, slot=1, func=0
  198. class=06-04-00, hdrtype=0x01, mfdev=0
  199. cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
  200. lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
  201. intpin=a, irq=5
  202. powerspec 3  supports D0 D3  current D0
  203. MSI supports 1 message
  204. pcib0: matched entry for 0.1.INTA
  205. pcib0: slot 1 INTA hardwired to IRQ 16
  206. found->        vendor=0x8086, dev=0x2937, revid=0x02
  207. domain=0, bus=0, slot=26, func=0
  208. class=0c-03-00, hdrtype=0x00, mfdev=1
  209. cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
  210. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  211. intpin=a, irq=5
  212. map[20]: type I/O Port, range 32, base 0x1820, size  5, enabled
  213. pcib0: matched entry for 0.26.INTA
  214. pcib0: slot 26 INTA hardwired to IRQ 16
  215. found->        vendor=0x8086, dev=0x2938, revid=0x02
  216. domain=0, bus=0, slot=26, func=1
  217. class=0c-03-00, hdrtype=0x00, mfdev=0
  218. cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
  219. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  220. intpin=b, irq=10
  221. map[20]: type I/O Port, range 32, base 0x1840, size  5, enabled
  222. pcib0: matched entry for 0.26.INTB
  223. pcib0: slot 26 INTB hardwired to IRQ 17
  224. found->        vendor=0x8086, dev=0x2939, revid=0x02
  225. domain=0, bus=0, slot=26, func=2
  226. class=0c-03-00, hdrtype=0x00, mfdev=0
  227. cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
  228. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  229. intpin=c, irq=11
  230. map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
  231. pcib0: matched entry for 0.26.INTC
  232. pcib0: slot 26 INTC hardwired to IRQ 18
  233. found->        vendor=0x8086, dev=0x293c, revid=0x02
  234. domain=0, bus=0, slot=26, func=7
  235. class=0c-03-20, hdrtype=0x00, mfdev=0
  236. cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
  237. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  238. intpin=c, irq=11
  239. powerspec 2  supports D0 D3  current D0
  240. map[10]: type Memory, range 32, base 0xd8901000, size 10, enabled
  241. pcib0: matched entry for 0.26.INTC
  242. pcib0: slot 26 INTC hardwired to IRQ 18
  243. found->        vendor=0x8086, dev=0x2940, revid=0x02
  244. domain=0, bus=0, slot=28, func=0
  245. class=06-04-00, hdrtype=0x01, mfdev=1
  246. cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
  247. lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
  248. intpin=a, irq=5
  249. powerspec 2  supports D0 D3  current D0
  250. MSI supports 1 message
  251. pcib0: matched entry for 0.28.INTA
  252. pcib0: slot 28 INTA hardwired to IRQ 16
  253. found->        vendor=0x8086, dev=0x2948, revid=0x02
  254. domain=0, bus=0, slot=28, func=4
  255. class=06-04-00, hdrtype=0x01, mfdev=1
  256. cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
  257. lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
  258. intpin=a, irq=5
  259. powerspec 2  supports D0 D3  current D0
  260. MSI supports 1 message
  261. pcib0: matched entry for 0.28.INTA
  262. pcib0: slot 28 INTA hardwired to IRQ 16
  263. found->        vendor=0x8086, dev=0x294a, revid=0x02
  264. domain=0, bus=0, slot=28, func=5
  265. class=06-04-00, hdrtype=0x01, mfdev=1
  266. cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
  267. lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
  268. intpin=b, irq=10
  269. powerspec 2  supports D0 D3  current D0
  270. MSI supports 1 message
  271. pcib0: matched entry for 0.28.INTB
  272. pcib0: slot 28 INTB hardwired to IRQ 17
  273. found->        vendor=0x8086, dev=0x2934, revid=0x02
  274. domain=0, bus=0, slot=29, func=0
  275. class=0c-03-00, hdrtype=0x00, mfdev=1
  276. cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
  277. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  278. intpin=a, irq=5
  279. map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
  280. pcib0: matched entry for 0.29.INTA
  281. pcib0: slot 29 INTA hardwired to IRQ 16
  282. found->        vendor=0x8086, dev=0x2935, revid=0x02
  283. domain=0, bus=0, slot=29, func=1
  284. class=0c-03-00, hdrtype=0x00, mfdev=0
  285. cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
  286. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  287. intpin=b, irq=10
  288. map[20]: type I/O Port, range 32, base 0x18a0, size  5, enabled
  289. pcib0: matched entry for 0.29.INTB
  290. pcib0: slot 29 INTB hardwired to IRQ 17
  291. found->        vendor=0x8086, dev=0x2936, revid=0x02
  292. domain=0, bus=0, slot=29, func=2
  293. class=0c-03-00, hdrtype=0x00, mfdev=0
  294. cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
  295. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  296. intpin=c, irq=11
  297. map[20]: type I/O Port, range 32, base 0x18c0, size  5, enabled
  298. pcib0: matched entry for 0.29.INTC
  299. pcib0: slot 29 INTC hardwired to IRQ 18
  300. found->        vendor=0x8086, dev=0x293a, revid=0x02
  301. domain=0, bus=0, slot=29, func=7
  302. class=0c-03-20, hdrtype=0x00, mfdev=0
  303. cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
  304. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  305. intpin=a, irq=5
  306. powerspec 2  supports D0 D3  current D0
  307. map[10]: type Memory, range 32, base 0xd8901400, size 10, enabled
  308. pcib0: matched entry for 0.29.INTA
  309. pcib0: slot 29 INTA hardwired to IRQ 16
  310. found->        vendor=0x8086, dev=0x244e, revid=0x92
  311. domain=0, bus=0, slot=30, func=0
  312. class=06-04-01, hdrtype=0x01, mfdev=0
  313. cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
  314. lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
  315. found->        vendor=0x8086, dev=0x2916, revid=0x02
  316. domain=0, bus=0, slot=31, func=0
  317. class=06-01-00, hdrtype=0x00, mfdev=1
  318. cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
  319. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  320. found->        vendor=0x8086, dev=0x2920, revid=0x02
  321. domain=0, bus=0, slot=31, func=2
  322. class=01-01-8a, hdrtype=0x00, mfdev=0
  323. cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
  324. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  325. intpin=b, irq=255
  326. powerspec 3  supports D0 D3  current D0
  327. map[20]: type I/O Port, range 32, base 0x1c10, size  4, enabled
  328. map[24]: type I/O Port, range 32, base 0x1c00, size  4, enabled
  329. found->        vendor=0x8086, dev=0x2930, revid=0x02
  330. domain=0, bus=0, slot=31, func=3
  331. class=0c-05-00, hdrtype=0x00, mfdev=0
  332. cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
  333. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  334. intpin=b, irq=10
  335. map[10]: type Memory, range 64, base 0xd8901800, size  8, memory disabled
  336. map[20]: type I/O Port, range 32, base 0x1100, size  5, enabled
  337. pcib0: matched entry for 0.31.INTB
  338. pcib0: slot 31 INTB hardwired to IRQ 17
  339. found->        vendor=0x8086, dev=0x2926, revid=0x02
  340. domain=0, bus=0, slot=31, func=5
  341. class=01-01-85, hdrtype=0x00, mfdev=0
  342. cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
  343. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  344. intpin=c, irq=11
  345. powerspec 3  supports D0 D3  current D0
  346. map[10]: type I/O Port, range 32, base 0x1c68, size  3, enabled
  347. map[14]: type I/O Port, range 32, base 0x1c5c, size  2, enabled
  348. map[18]: type I/O Port, range 32, base 0x1c60, size  3, enabled
  349. map[1c]: type I/O Port, range 32, base 0x1c58, size  2, enabled
  350. map[20]: type I/O Port, range 32, base 0x1c30, size  4, enabled
  351. map[24]: type I/O Port, range 32, base 0x1c20, size  4, enabled
  352. pcib0: matched entry for 0.31.INTC
  353. pcib0: slot 31 INTC hardwired to IRQ 18
  354. found->        vendor=0x8086, dev=0x2932, revid=0x02
  355. domain=0, bus=0, slot=31, func=6
  356. class=11-80-00, hdrtype=0x00, mfdev=0
  357. cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
  358. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  359. intpin=a, irq=5
  360. powerspec 3  supports D0 D3  current D0
  361. map[10]: type Memory, range 64, base 0xd8900000, size 12, enabled
  362. pcib0: matched entry for 0.31.INTA
  363. pcib0: slot 31 INTA hardwired to IRQ 16
  364. pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
  365. pcib1:   domain            0
  366. pcib1:   secondary bus     1
  367. pcib1:   subordinate bus   3
  368. pcib1:   I/O decode        0x2000-0x3fff
  369. pcib1:   memory decode     0xd8000000-0xd82fffff
  370. pcib1:   no prefetched decode
  371. pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.PEG_ - AE_NOT_FOUND
  372. pci1: <ACPI PCI bus> on pcib1
  373. pci1: domain=0, physical bus=1
  374. found->        vendor=0x8086, dev=0x0329, revid=0x09
  375. domain=0, bus=1, slot=0, func=0
  376. class=06-04-00, hdrtype=0x01, mfdev=1
  377. cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
  378. lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
  379. powerspec 2  supports D0 D3  current D0
  380. MSI supports 1 message, 64 bit
  381. found->        vendor=0x8086, dev=0x0326, revid=0x09
  382. domain=0, bus=1, slot=0, func=1
  383. class=08-00-20, hdrtype=0x00, mfdev=1
  384. cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
  385. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  386. powerspec 2  supports D0 D3  current D0
  387. map[10]: type Memory, range 32, base 0xd8200000, size 12, enabled
  388. pcib1: requested memory range 0xd8200000-0xd8200fff: good
  389. found->        vendor=0x8086, dev=0x032a, revid=0x09
  390. domain=0, bus=1, slot=0, func=2
  391. class=06-04-00, hdrtype=0x01, mfdev=1
  392. cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
  393. lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
  394. powerspec 2  supports D0 D3  current D0
  395. MSI supports 1 message, 64 bit
  396. found->        vendor=0x8086, dev=0x0327, revid=0x09
  397. domain=0, bus=1, slot=0, func=3
  398. class=08-00-20, hdrtype=0x00, mfdev=1
  399. cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
  400. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  401. powerspec 2  supports D0 D3  current D0
  402. map[10]: type Memory, range 32, base 0xd8201000, size 12, enabled
  403. pcib1: requested memory range 0xd8201000-0xd8201fff: good
  404. pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
  405. pcib2:   domain            0
  406. pcib2:   secondary bus     2
  407. pcib2:   subordinate bus   2
  408. pcib2:   I/O decode        0x2000-0x2fff
  409. pcib2:   memory decode     0xd8100000-0xd81fffff
  410. pcib2:   no prefetched decode
  411. pci2: <ACPI PCI bus> on pcib2
  412. pci2: domain=0, physical bus=2
  413. found->        vendor=0x10b7, dev=0x9200, revid=0x78
  414. domain=0, bus=2, slot=2, func=0
  415. class=02-00-00, hdrtype=0x00, mfdev=0
  416. cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
  417. lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
  418. intpin=a, irq=5
  419. powerspec 2  supports D0 D1 D2 D3  current D0
  420. map[10]: type I/O Port, range 32, base 0x2800, size  7, enabled
  421. pcib2: requested I/O range 0x2800-0x287f: in range
  422. pcib1: requested I/O range 0x2800-0x287f: in range
  423. map[14]: type Memory, range 32, base 0xd8100000, size  7, enabled
  424. pcib2: requested memory range 0xd8100000-0xd810007f: good
  425. pcib1: requested memory range 0xd8100000-0xd810007f: good
  426. pcib2: matched entry for 2.2.INTA
  427. pcib2: slot 2 INTA hardwired to IRQ 28
  428. found->        vendor=0x9005, dev=0x800f, revid=0x10
  429. domain=0, bus=2, slot=3, func=0
  430. class=01-00-00, hdrtype=0x00, mfdev=0
  431. cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
  432. lattimer=0x48 (2160 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
  433. intpin=a, irq=11
  434. powerspec 2  supports D0 D3  current D0
  435. MSI supports 2 messages, 64 bit
  436. map[10]: type I/O Port, range 32, base 0x2400, size  8, enabled
  437. pcib2: requested I/O range 0x2400-0x24ff: in range
  438. pcib1: requested I/O range 0x2400-0x24ff: in range
  439. map[14]: type Memory, range 64, base 0xd8102000, size 13, enabled
  440. pcib2: requested memory range 0xd8102000-0xd8103fff: good
  441. pcib1: requested memory range 0xd8102000-0xd8103fff: good
  442. map[1c]: type I/O Port, range 32, base 0x2000, size  8, enabled
  443. pcib2: requested I/O range 0x2000-0x20ff: in range
  444. pcib1: requested I/O range 0x2000-0x20ff: in range
  445. pcib2: matched entry for 2.3.INTA
  446. pcib2: slot 3 INTA hardwired to IRQ 26
  447. xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2800-0x287f mem 0xd8100000-0xd810007f irq 28 at device 2.0 on pci2
  448. xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xd8100000
  449. xl0: using memory mapped I/O
  450. xl0: media options word: a
  451. xl0: found MII/AUTO
  452. miibus0: <MII bus> on xl0
  453. ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0
  454. ukphy0: OUI 0x00105a, model 0x0000, rev. 0
  455. ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
  456. xl0: bpf attached
  457. xl0: Ethernet address: 00:01:02:99:b4:96
  458. ioapic1: routing intpin 4 (PCI IRQ 28) to vector 49
  459. xl0: [MPSAFE]
  460. xl0: [ITHREAD]
  461. ahd0: <Adaptec AIC7901 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xd8102000-0xd8103fff irq 26 at device 3.0 on pci2
  462. ahd0: Defaulting to MEMIO on
  463. ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xd8102000
  464. ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
  465. ahd0: Reading SEEPROM...done.
  466. ahd0: STPWLEVEL is on
  467. ahd0: Manual Primary Termination
  468. ahd0: Manual Secondary Termination
  469. ahd0: Primary High byte termination Enabled
  470. ahd0: Primary Low byte termination Enabled
  471. ahd0: Secondary High byte termination Disabled
  472. ahd0: Secondary Low byte termination Disabled
  473. ahd0: Downloading Sequencer Program... 682 instructions downloaded
  474. ahd0: Features 0x3c001, Bugs 0x500000, Flags 0x43f1
  475. ioapic1: routing intpin 2 (PCI IRQ 26) to vector 50
  476. ahd0: [MPSAFE]
  477. ahd0: [ITHREAD]
  478. aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
  479. pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
  480. pcib3:   domain            0
  481. pcib3:   secondary bus     3
  482. pcib3:   subordinate bus   3
  483. pcib3:   I/O decode        0x3000-0x3fff
  484. pcib3:   memory decode     0xd8000000-0xd80fffff
  485. pcib3:   no prefetched decode
  486. pci3: <ACPI PCI bus> on pcib3
  487. pci3: domain=0, physical bus=3
  488. found->        vendor=0x8086, dev=0x1079, revid=0x03
  489. domain=0, bus=3, slot=1, func=0
  490. class=02-00-00, hdrtype=0x00, mfdev=1
  491. cmdreg=0x0017, statreg=0x0230, cachelnsz=8 (dwords)
  492. lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
  493. intpin=a, irq=5
  494. powerspec 2  supports D0 D3  current D0
  495. MSI supports 1 message, 64 bit
  496. map[10]: type Memory, range 64, base 0xd8080000, size 17, enabled
  497. pcib3: requested memory range 0xd8080000-0xd809ffff: good
  498. pcib1: requested memory range 0xd8080000-0xd809ffff: good
  499. map[18]: type Memory, range 64, base 0xd8000000, size 18, enabled
  500. pcib3: requested memory range 0xd8000000-0xd803ffff: good
  501. pcib1: requested memory range 0xd8000000-0xd803ffff: good
  502. map[20]: type I/O Port, range 32, base 0x3000, size  6, enabled
  503. pcib3: requested I/O range 0x3000-0x303f: in range
  504. pcib1: requested I/O range 0x3000-0x303f: in range
  505. pcib3: matched entry for 3.1.INTA
  506. pcib3: slot 1 INTA hardwired to IRQ 48
  507. found->        vendor=0x8086, dev=0x1079, revid=0x03
  508. domain=0, bus=3, slot=1, func=1
  509. class=02-00-00, hdrtype=0x00, mfdev=1
  510. cmdreg=0x0017, statreg=0x0230, cachelnsz=8 (dwords)
  511. lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
  512. intpin=b, irq=10
  513. powerspec 2  supports D0 D3  current D0
  514. MSI supports 1 message, 64 bit
  515. map[10]: type Memory, range 64, base 0xd80a0000, size 17, enabled
  516. pcib3: requested memory range 0xd80a0000-0xd80bffff: good
  517. pcib1: requested memory range 0xd80a0000-0xd80bffff: good
  518. map[18]: type Memory, range 64, base 0xd8040000, size 18, enabled
  519. pcib3: requested memory range 0xd8040000-0xd807ffff: good
  520. pcib1: requested memory range 0xd8040000-0xd807ffff: good
  521. map[20]: type I/O Port, range 32, base 0x3040, size  6, enabled
  522. pcib3: requested I/O range 0x3040-0x307f: in range
  523. pcib1: requested I/O range 0x3040-0x307f: in range
  524. pcib3: matched entry for 3.1.INTB
  525. pcib3: slot 1 INTB hardwired to IRQ 49
  526. em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x3000-0x303f mem 0xd8080000-0xd809ffff,0xd8000000-0xd803ffff irq 48 at device 1.0 on pci3
  527. em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8080000
  528. em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3000
  529. em0: bpf attached
  530. em0: Ethernet address: 00:04:23:df:69:ae
  531. ioapic2: routing intpin 0 (PCI IRQ 48) to vector 51
  532. em0: [FILTER]
  533. em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x3040-0x307f mem 0xd80a0000-0xd80bffff,0xd8040000-0xd807ffff irq 49 at device 1.1 on pci3
  534. em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd80a0000
  535. em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040
  536. em1: bpf attached
  537. em1: Ethernet address: 00:04:23:df:69:af
  538. ioapic2: routing intpin 1 (PCI IRQ 49) to vector 52
  539. em1: [FILTER]
  540. uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
  541. uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
  542. ioapic0: routing intpin 16 (PCI IRQ 16) to vector 53
  543. uhci0: [GIANT-LOCKED]
  544. uhci0: [ITHREAD]
  545. usb0: <UHCI (generic) USB controller> on uhci0
  546. usb0: USB revision 1.0
  547. uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
  548. uhub0: 2 ports with 2 removable, self powered
  549. uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at device 26.1 on pci0
  550. uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
  551. ioapic0: routing intpin 17 (PCI IRQ 17) to vector 54
  552. uhci1: [GIANT-LOCKED]
  553. uhci1: [ITHREAD]
  554. usb1: <UHCI (generic) USB controller> on uhci1
  555. usb1: USB revision 1.0
  556. uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
  557. uhub1: 2 ports with 2 removable, self powered
  558. uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 26.2 on pci0
  559. uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
  560. ioapic0: routing intpin 18 (PCI IRQ 18) to vector 55
  561. uhci2: [GIANT-LOCKED]
  562. uhci2: [ITHREAD]
  563. usb2: <UHCI (generic) USB controller> on uhci2
  564. usb2: USB revision 1.0
  565. uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
  566. uhub2: 2 ports with 2 removable, self powered
  567. ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd8901000-0xd89013ff irq 18 at device 26.7 on pci0
  568. ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8901000
  569. ehci0: [GIANT-LOCKED]
  570. ehci0: [ITHREAD]
  571. usb3: EHCI version 1.0
  572. usb3: companion controllers, 2 ports each: usb0 usb1 usb2
  573. usb3: <EHCI (generic) USB 2.0 controller> on ehci0
  574. usb3: USB revision 2.0
  575. uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
  576. uhub3: 6 ports with 6 removable, self powered
  577. pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
  578. pcib4:   domain            0
  579. pcib4:   secondary bus     5
  580. pcib4:   subordinate bus   5
  581. pcib4:   I/O decode        0x4000-0x4fff
  582. pcib4:   memory decode     0xd8300000-0xd83fffff
  583. pcib4:   no prefetched decode
  584. pci5: <ACPI PCI bus> on pcib4
  585. pci5: domain=0, physical bus=5
  586. found->        vendor=0x8086, dev=0x10b9, revid=0x06
  587. domain=0, bus=5, slot=0, func=0
  588. class=02-00-00, hdrtype=0x00, mfdev=0
  589. cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
  590. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  591. intpin=a, irq=12
  592. powerspec 2  supports D0 D3  current D0
  593. MSI supports 1 message, 64 bit
  594. map[10]: type Memory, range 32, base 0xd8320000, size 17, enabled
  595. pcib4: requested memory range 0xd8320000-0xd833ffff: good
  596. map[14]: type Memory, range 32, base 0xd8300000, size 17, enabled
  597. pcib4: requested memory range 0xd8300000-0xd831ffff: good
  598. map[18]: type I/O Port, range 32, base 0x4000, size  5, enabled
  599. pcib4: requested I/O range 0x4000-0x401f: in range
  600. pcib4: matched entry for 5.0.INTA
  601. pcib4: slot 0 INTA hardwired to IRQ 16
  602. em2: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x4000-0x401f mem 0xd8320000-0xd833ffff,0xd8300000-0xd831ffff irq 16 at device 0.0 on pci5
  603. em2: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8320000
  604. em2: attempting to allocate 1 MSI vectors (1 supported)
  605. msi: routing MSI IRQ 256 to vector 56
  606. em2: using IRQ 256 for MSI
  607. em2: Using MSI interrupt
  608. em2: bpf attached
  609. em2: Ethernet address: 00:15:17:0b:e9:22
  610. em2: [FILTER]
  611. pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
  612. pcib5:   domain            0
  613. pcib5:   secondary bus     13
  614. pcib5:   subordinate bus   13
  615. pcib5:   I/O decode        0x5000-0x5fff
  616. pcib5:   memory decode     0xd8400000-0xd84fffff
  617. pcib5:   no prefetched decode
  618. pci13: <ACPI PCI bus> on pcib5
  619. pci13: domain=0, physical bus=13
  620. found->        vendor=0x8086, dev=0x108c, revid=0x03
  621. domain=0, bus=13, slot=0, func=0
  622. class=02-00-00, hdrtype=0x00, mfdev=0
  623. cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
  624. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  625. intpin=a, irq=5
  626. powerspec 2  supports D0 D3  current D0
  627. MSI supports 1 message, 64 bit
  628. map[10]: type Memory, range 32, base 0xd8400000, size 17, enabled
  629. pcib5: requested memory range 0xd8400000-0xd841ffff: good
  630. map[18]: type I/O Port, range 32, base 0x5000, size  5, enabled
  631. pcib5: requested I/O range 0x5000-0x501f: in range
  632. pcib5: matched entry for 13.0.INTA
  633. pcib5: slot 0 INTA hardwired to IRQ 16
  634. em3: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x5000-0x501f mem 0xd8400000-0xd841ffff irq 16 at device 0.0 on pci13
  635. em3: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8400000
  636. em3: attempting to allocate 1 MSI vectors (1 supported)
  637. msi: routing MSI IRQ 257 to vector 57
  638. em3: using IRQ 257 for MSI
  639. em3: Using MSI interrupt
  640. em3: bpf attached
  641. em3: Ethernet address: 00:30:48:62:e3:00
  642. em3: [FILTER]
  643. pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
  644. pcib6:   domain            0
  645. pcib6:   secondary bus     15
  646. pcib6:   subordinate bus   15
  647. pcib6:   I/O decode        0x6000-0x6fff
  648. pcib6:   memory decode     0xd8500000-0xd85fffff
  649. pcib6:   no prefetched decode
  650. pci15: <ACPI PCI bus> on pcib6
  651. pci15: domain=0, physical bus=15
  652. found->        vendor=0x8086, dev=0x109a, revid=0x00
  653. domain=0, bus=15, slot=0, func=0
  654. class=02-00-00, hdrtype=0x00, mfdev=0
  655. cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
  656. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  657. intpin=a, irq=10
  658. powerspec 2  supports D0 D3  current D0
  659. MSI supports 1 message, 64 bit
  660. map[10]: type Memory, range 32, base 0xd8500000, size 17, enabled
  661. pcib6: requested memory range 0xd8500000-0xd851ffff: good
  662. map[18]: type I/O Port, range 32, base 0x6000, size  5, enabled
  663. pcib6: requested I/O range 0x6000-0x601f: in range
  664. pcib6: matched entry for 15.0.INTA
  665. pcib6: slot 0 INTA hardwired to IRQ 17
  666. em4: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x6000-0x601f mem 0xd8500000-0xd851ffff irq 17 at device 0.0 on pci15
  667. em4: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8500000
  668. em4: attempting to allocate 1 MSI vectors (1 supported)
  669. msi: routing MSI IRQ 258 to vector 58
  670. em4: using IRQ 258 for MSI
  671. em4: Using MSI interrupt
  672. em4: bpf attached
  673. em4: Ethernet address: 00:30:48:62:e3:01
  674. em4: [FILTER]
  675. uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.0 on pci0
  676. uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
  677. uhci3: [GIANT-LOCKED]
  678. uhci3: [ITHREAD]
  679. usb4: <UHCI (generic) USB controller> on uhci3
  680. usb4: USB revision 1.0
  681. uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
  682. uhub4: 2 ports with 2 removable, self powered
  683. uhci4: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 17 at device 29.1 on pci0
  684. uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
  685. uhci4: [GIANT-LOCKED]
  686. uhci4: [ITHREAD]
  687. usb5: <UHCI (generic) USB controller> on uhci4
  688. usb5: USB revision 1.0
  689. uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
  690. uhub5: 2 ports with 2 removable, self powered
  691. uhci5: <UHCI (generic) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0
  692. uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0
  693. uhci5: [GIANT-LOCKED]
  694. uhci5: [ITHREAD]
  695. usb6: <UHCI (generic) USB controller> on uhci5
  696. usb6: USB revision 1.0
  697. uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
  698. uhub6: 2 ports with 2 removable, self powered
  699. ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd8901400-0xd89017ff irq 16 at device 29.7 on pci0
  700. ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8901400
  701. ehci1: [GIANT-LOCKED]
  702. ehci1: [ITHREAD]
  703. usb7: EHCI version 1.0
  704. usb7: companion controllers, 2 ports each: usb4 usb5 usb6
  705. usb7: <EHCI (generic) USB 2.0 controller> on ehci1
  706. usb7: USB revision 2.0
  707. uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
  708. uhub7: 6 ports with 6 removable, self powered
  709. pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
  710. pcib7:   domain            0
  711. pcib7:   secondary bus     17
  712. pcib7:   subordinate bus   17
  713. pcib7:   I/O decode        0x7000-0x7fff
  714. pcib7:   memory decode     0xd8600000-0xd86fffff
  715. pcib7:   prefetched decode 0xd0000000-0xd7ffffff
  716. pcib7:   Subtractively decoded bridge.
  717. pci17: <ACPI PCI bus> on pcib7
  718. pci17: domain=0, physical bus=17
  719. found->        vendor=0x1002, dev=0x515e, revid=0x02
  720. domain=0, bus=17, slot=4, func=0
  721. class=03-00-00, hdrtype=0x00, mfdev=0
  722. cmdreg=0x0287, statreg=0x0290, cachelnsz=8 (dwords)
  723. lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
  724. intpin=a, irq=10
  725. powerspec 2  supports D0 D1 D2 D3  current D0
  726. map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled
  727. pcib7: requested memory range 0xd0000000-0xd7ffffff: good
  728. map[14]: type I/O Port, range 32, base 0x7000, size  8, enabled
  729. pcib7: requested I/O range 0x7000-0x70ff: in range
  730. map[18]: type Memory, range 32, base 0xd8600000, size 16, enabled
  731. pcib7: requested memory range 0xd8600000-0xd860ffff: good
  732. pcib7: matched entry for 17.4.INTA
  733. pcib7: slot 4 INTA hardwired to IRQ 22
  734. vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 0xd0000000-0xd7ffffff,0xd8600000-0xd860ffff irq 22 at device 4.0 on pci17
  735. isab0: <PCI-ISA bridge> at device 31.0 on pci0
  736. isa0: <ISA bus> on isab0
  737. atapci0: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c10-0x1c1f,0x1c00-0x1c0f at device 31.2 on pci0
  738. atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c10
  739. atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0x1c00
  740. ata0: <ATA channel 0> on atapci0
  741. atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
  742. atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
  743. ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
  744. ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
  745. ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
  746. ata0: reset tp2 stat0=ff stat1=ff devices=0x0
  747. ioapic0: routing intpin 14 (ISA IRQ 14) to vector 59
  748. ata0: [MPSAFE]
  749. ata0: [ITHREAD]
  750. ata1: <ATA channel 1> on atapci0
  751. atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
  752. atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
  753. ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
  754. ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
  755. ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
  756. ata1: reset tp2 stat0=ff stat1=ff devices=0x0
  757. ioapic0: routing intpin 15 (ISA IRQ 15) to vector 60
  758. ata1: [MPSAFE]
  759. ata1: [ITHREAD]
  760. pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
  761. atapci1: <Intel ICH9 SATA300 controller> port 0x1c68-0x1c6f,0x1c5c-0x1c5f,0x1c60-0x1c67,0x1c58-0x1c5b,0x1c30-0x1c3f,0x1c20-0x1c2f irq 18 at device 31.5 on pci0
  762. atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c30
  763. atapci1: [MPSAFE]
  764. atapci1: [ITHREAD]
  765. atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x1c20
  766. ata2: <ATA channel 0> on atapci1
  767. atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1c68
  768. atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1c5c
  769. ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
  770. ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
  771. ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
  772. ata2: reset tp2 stat0=ff stat1=ff devices=0x0
  773. ata2: [MPSAFE]
  774. ata2: [ITHREAD]
  775. ata3: <ATA channel 1> on atapci1
  776. atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1c60
  777. atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1c58
  778. ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
  779. ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
  780. ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
  781. ata3: reset tp2 stat0=ff stat1=ff devices=0x0
  782. ata3: [MPSAFE]
  783. ata3: [ITHREAD]
  784. pci0: <dasp> at device 31.6 (no driver attached)
  785. acpi_button0: <Power Button> on acpi0
  786. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  787. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  788. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  789. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  790. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  791. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  792. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  793. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  794. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  795. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  796. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  797. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  798. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
  799. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  800. atkbd: the current kbd controller command byte 0067
  801. atkbd: keyboard ID 0x41ab (2)
  802. kbd0 at atkbd0
  803. kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
  804. ioapic0: routing intpin 1 (ISA IRQ 1) to vector 61
  805. atkbd0: [GIANT-LOCKED]
  806. atkbd0: [ITHREAD]
  807. psm0: unable to allocate IRQ
  808. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  809. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  810. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  811. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  812. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  813. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  814. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  815. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  816. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  817. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  818. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  819. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  820. psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
  821. psm0: current command byte:0067
  822. psm0: failed to reset the aux device.
  823. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  824. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  825. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  826. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  827. sio0: irq maps: 0x1c21 0x1c31 0x1c21 0x1c21
  828. sio0: irq maps: 0x1c21 0x1c31 0x1c21 0x1c21
  829. sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  830. sio0: type 16550A
  831. ioapic0: routing intpin 4 (ISA IRQ 4) to vector 62
  832. sio0: [FILTER]
  833. sio1: irq maps: 0x1c21 0x1c29 0x1c21 0x1c21
  834. sio1: irq maps: 0x1c21 0x1c29 0x1c21 0x1c21
  835. sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
  836. sio1: type 16550A
  837. ioapic0: routing intpin 3 (ISA IRQ 3) to vector 63
  838. sio1: [FILTER]
  839. fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
  840. fdc0: ic_type 90 part_id 80
  841. ioapic0: routing intpin 6 (ISA IRQ 6) to vector 64
  842. fdc0: [FILTER]
  843. unknown: status reg test failed ff
  844. ex_isa_identify()
  845. ahc_isa_probe 1: ioport 0x1c00 alloc failed
  846. ata: ata0 already exists; skipping it
  847. ata: ata1 already exists; skipping it
  848. atkbdc: atkbdc0 already exists; skipping it
  849. fdc: fdc0 already exists; skipping it
  850. sio: sio0 already exists; skipping it
  851. sio: sio1 already exists; skipping it
  852. pnp_identify: Trying Read_Port at 203
  853. pnp_identify: Trying Read_Port at 243
  854. pnp_identify: Trying Read_Port at 283
  855. pnp_identify: Trying Read_Port at 2c3
  856. pnp_identify: Trying Read_Port at 303
  857. pnp_identify: Trying Read_Port at 343
  858. pnp_identify: Trying Read_Port at 383
  859. pnp_identify: Trying Read_Port at 3c3
  860. PNP Identify complete
  861. sc: sc0 already exists; skipping it
  862. vga: vga0 already exists; skipping it
  863. isa_probe_children: disabling PnP devices
  864. isa_probe_children: probing non-PnP devices
  865. pmtimer0 on isa0
  866. orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0
  867. adv0: not probed (disabled)
  868. aha0: not probed (disabled)
  869. aic0: not probed (disabled)
  870. bt0: not probed (disabled)
  871. cs0: not probed (disabled)
  872. ed0: not probed (disabled)
  873. fe0: not probed (disabled)
  874. ie0: not probed (disabled)
  875. le0: not probed (disabled)
  876. ppc0: parallel port found at 0x378
  877. ppc0: using extended I/O port range
  878. ppc0: ECP SPP ECP+EPP SPP
  879. ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
  880. ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
  881. ppc0: FIFO with 16/16/9 bytes threshold
  882. ppbus0: <Parallel port bus> on ppc0
  883. ioapic0: routing intpin 7 (ISA IRQ 7) to vector 65
  884. ppbus0: [MPSAFE]
  885. ppbus0: [ITHREAD]
  886. plip0: <PLIP network interface> on ppbus0
  887. plip0: bpf attached
  888. lpt0: <Printer> on ppbus0
  889. lpt0: Interrupt-driven port
  890. ppi0: <Parallel I/O> on ppbus0
  891. ppc0: [GIANT-LOCKED]
  892. ppc0: [ITHREAD]
  893. sc0: <System console> at flags 0x100 on isa0
  894. sc0: VGA <16 virtual consoles, flags=0x300>
  895. sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
  896. sio2: not probed (disabled)
  897. sio3: not probed (disabled)
  898. sn0: not probed (disabled)
  899. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  900. vt0: not probed (disabled)
  901. isa_probe_children: probing PnP devices
  902. Device configuration finished.
  903. Reducing kern.maxvnodes 214488 -> 100000
  904. procfs registered
  905. lapic: Divisor 2, Frequency 133000479 hz
  906. Timecounter "TSC" frequency 2660009400 Hz quality -100
  907. Timecounters tick every 1.000 msec
  908. lo0: bpf attached
  909. hptrr: no controller detected.
  910. Waiting 5 seconds for SCSI devices to settle
  911. (noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
  912. ahd0: Selection Timeout on A:8. 0 SCBs aborted
  913. ahd0: Selection Timeout on A:9. 0 SCBs aborted
  914. ahd0: Selection Timeout on A:10. 0 SCBs aborted
  915. ahd0: Selection Timeout on A:11. 0 SCBs aborted
  916. ahd0: Selection Timeout on A:12. 0 SCBs aborted
  917. ahd0: Selection Timeout on A:13. 0 SCBs aborted
  918. ahd0: Selection Timeout on A:14. 0 SCBs aborted
  919. ahd0: Selection Timeout on A:15. 0 SCBs aborted
  920. (probe1:ahd0:0:1:0): Retrying Command
  921. (probe5:ahd0:0:5:0): Retrying Command
  922. (probe3:ahd0:0:3:0): Retrying Command
  923. (probe6:ahd0:0:6:0): Retrying Command
  924. (probe0:ahd0:0:0:0): Retrying Command
  925. (probe2:ahd0:0:2:0): Retrying Command
  926. (probe4:ahd0:0:4:0): Retrying Command
  927. (probe1:ahd0:0:1:0): Down reving Protocol Version from 4 to 3?
  928. (ahd0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
  929. (probe5:ahd0:0:5:0): Down reving Protocol Version from 4 to 3?
  930. (probe6:ahd0:0:6:0): Down reving Protocol Version from 4 to 3?
  931. (probe3:ahd0:0:3:0): Down reving Protocol Version from 4 to 3?
  932. (probe0:ahd0:0:0:0): Down reving Protocol Version from 4 to 3?
  933. (probe2:ahd0:0:2:0): Down reving Protocol Version from 4 to 3?
  934. (ahd0:A:1:0): Received PPR width 1, period 9, offset 3f,options 2
  935. Filtered to width 1, period 9, offset 3f, options 2
  936. ahd0: target 1 using 16bit transfers
  937. ahd0: target 1 synchronous with period = 0x9, offset = 0x3f(DT)
  938. (probe4:ahd0:0:4:0): Down reving Protocol Version from 4 to 3?
  939. (ahd0:A:5:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
  940. (ahd0:A:5:0): Received PPR width 1, period 9, offset 3f,options 2
  941. Filtered to width 1, period 9, offset 3f, options 2
  942. ahd0: target 5 using 16bit transfers
  943. ahd0: target 5 synchronous with period = 0x9, offset = 0x3f(DT)
  944. (ahd0:A:6:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
  945. (ahd0:A:6:0): Received PPR width 1, period 9, offset 3f,options 2
  946. Filtered to width 1, period 9, offset 3f, options 2
  947. ahd0: target 6 using 16bit transfers
  948. ahd0: target 6 synchronous with period = 0x9, offset = 0x3f(DT)
  949. (ahd0:A:3:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
  950. (ahd0:A:3:0): Received PPR width 1, period 9, offset 3f,options 2
  951. Filtered to width 1, period 9, offset 3f, options 2
  952. ahd0: target 3 using 16bit transfers
  953. ahd0: target 3 synchronous with period = 0x9, offset = 0x3f(DT)
  954. (ahd0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
  955. (ahd0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
  956. Filtered to width 1, period 9, offset 3f, options 2
  957. ahd0: target 0 using 16bit transfers
  958. ahd0: target 0 synchronous with period = 0x9, offset = 0x3f(DT)
  959. (ahd0:A:2:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
  960. (ahd0:A:2:0): Received PPR width 1, period 9, offset 3f,options 2
  961. Filtered to width 1, period 9, offset 3f, options 2
  962. ahd0: target 2 using 16bit transfers
  963. ahd0: target 2 synchronous with period = 0x9, offset = 0x3f(DT)
  964. (ahd0:A:4:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
  965. (ahd0:A:4:0): Received PPR width 1, period 9, offset 3f,options 2
  966. Filtered to width 1, period 9, offset 3f, options 2
  967. ahd0: target 4 using 16bit transfers
  968. ahd0: target 4 synchronous with period = 0x9, offset = 0x3f(DT)
  969. da0 at ahd0 bus 0 target 0 lun 0
  970. da0: <SEAGATE ST3300007LW 0004> Fixed Direct Access SCSI-3 device
  971. da0: Serial Number 3KR0R48A00007602X3LC
  972. da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  973. da0: Command Queueing Enabled
  974. da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
  975. da1 at ahd0 bus 0 target 1 lun 0
  976. da1: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  977. da1: Serial Number 3KR3CH8F00009721LCEQ
  978. da1: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  979. da1: Command Queueing Enabled
  980. da1: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
  981. da2 at ahd0 bus 0 target 2 lun 0
  982. da2: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  983. da2: Serial Number 3KR3CH7500009721LD1Y
  984. da2: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  985. da2: Command Queueing Enabled
  986. da2: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
  987. da3 at ahd0 bus 0 target 3 lun 0
  988. da3: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  989. da3: Serial Number 3KR375V0000097215F6Y
  990. da3: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  991. da3: Command Queueing Enabled
  992. da3: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
  993. GEOM: new disk da0
  994. GEOM: new disk da1
  995. GEOM: new disk da2
  996. GEOM: new disk da3
  997. pass0 at ahd0 bus 0 target 0 lun 0
  998. pass0: <SEAGATE ST3300007LW 0004> Fixed Direct Access SCSI-3 device
  999. pass0: Serial Number 3KR0R48A00007602X3LC
  1000. pass0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1001. pass0: Command Queueing Enabled
  1002. da4 at ahd0 bus 0 target 4 lun 0
  1003. da4: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1004. da4: Serial Number 3KR3AJ5500009721LK3D
  1005. da4: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1006. da4: Command Queueing Enabled
  1007. da4: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
  1008. da5 at ahd0 bus 0 target 5 lun 0
  1009. da5: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1010. da5: Serial Number 3KR3AJSE00009721LLGK
  1011. da5: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1012. da5: Command Queueing Enabled
  1013. da5: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
  1014. da6 at ahd0 bus 0 target 6 lun 0
  1015. da6: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1016. da6: Serial Number 3KR3B8ED00009721NTRC
  1017. da6: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1018. da6: Command Queueing Enabled
  1019. da6: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
  1020. pass1 at ahd0 bus 0 target 1 lun 0
  1021. pass1: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1022. pass1: Serial Number 3KR3CH8F00009721LCEQ
  1023. pass1: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1024. pass1: Command Queueing Enabled
  1025. pass2 at ahd0 bus 0 target 2 lun 0
  1026. pass2: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1027. pass2: Serial Number 3KR3CH7500009721LD1Y
  1028. pass2: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1029. pass2: Command Queueing Enabled
  1030. pass3 at ahd0 bus 0 target 3 lun 0
  1031. pass3: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1032. pass3: Serial Number 3KR375V0000097215F6Y
  1033. pass3: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1034. pass3: Command Queueing Enabled
  1035. pass4 at ahd0 bus 0 target 4 lun 0
  1036. pass4: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1037. pass4: Serial Number 3KR3AJ5500009721LK3D
  1038. pass4: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1039. pass4: Command Queueing Enabled
  1040. pass5 at ahd0 bus 0 target 5 lun 0
  1041. pass5: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1042. pass5: Serial Number 3KR3AJSE00009721LLGK
  1043. pass5: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1044. pass5: Command Queueing Enabled
  1045. pass6 at ahd0 bus 0 target 6 lun 0
  1046. pass6: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
  1047. pass6: Serial Number 3KR3B8ED00009721NTRC
  1048. pass6: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  1049. pass6: Command Queueing Enabled
  1050. ATA PseudoRAID loaded
  1051. SMP: AP CPU #1 Launched!
  1052. cpu1 AP:
  1053. ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  1054. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  1055. timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
  1056. ioapic0: Assigning ISA IRQ 1 to local APIC 0
  1057. ioapic0: Assigning ISA IRQ 3 to local APIC 1
  1058. ioapic0: Assigning ISA IRQ 4 to local APIC 0
  1059. ioapic0: Assigning ISA IRQ 6 to local APIC 1
  1060. ioapic0: Assigning ISA IRQ 7 to local APIC 0
  1061. ioapic0: Assigning ISA IRQ 9 to local APIC 1
  1062. ioapic0: Assigning ISA IRQ 14 to local APIC 0
  1063. ioapic0: Assigning ISA IRQ 15 to local APIC 1
  1064. ioapic0: Assigning PCI IRQ 16 to local APIC 0
  1065. ioapic0: Assigning PCI IRQ 17 to local APIC 1
  1066. ioapic0: Assigning PCI IRQ 18 to local APIC 0
  1067. ioapic1: Assigning PCI IRQ 26 to local APIC 1
  1068. ioapic1: Assigning PCI IRQ 28 to local APIC 0
  1069. ioapic2: Assigning PCI IRQ 48 to local APIC 1
  1070. ioapic2: Assigning PCI IRQ 49 to local APIC 0
  1071. msi: Assigning MSI IRQ 256 to local APIC 1
  1072. msi: Assigning MSI IRQ 257 to local APIC 0
  1073. msi: Assigning MSI IRQ 258 to local APIC 1
  1074. GEOM: new disk da4
  1075. GEOM: new disk da5
  1076. GEOM: new disk da6
  1077. Trying to mount root from ufs:/dev/da0s1a
  1078. start_init: trying /sbin/init
  1079. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  1080. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  1081. ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
  1082. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
  1083. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  1084. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  1085. ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
  1086. ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
  1087. GEOM_LABEL: Label for provider ccd0a is ufs/home.
  1088. GEOM_LABEL: Label ufs/home removed.
  1089. GEOM_LABEL: Label for provider ccd0a is ufs/home.
  1090. GEOM_LABEL: Label ufs/home removed.
  1091. Linux ELF exec handler installed
  1092. linprocfs registered
  1093. lagg0: bpf attached
  1094. em4: Link is up 100 Mbps Full Duplex
  1095. em4: link state changed to UP
  1096. em3: Link is up 1000 Mbps Full Duplex
  1097. em3: link state changed to UP
  1098. em0: Link is up 1000 Mbps Full Duplex
  1099. em0: link state changed to UP
  1100. lagg0: link state changed to UP
  1101. em1: Link is up 1000 Mbps Full Duplex
  1102. em1: link state changed to UP
  1103. em2: Link is up 1000 Mbps Full Duplex
  1104. em2: link state changed to UP
  1105. calcru: runtime went backwards from 553 usec to 208 usec for pid 1165 (svnserve.bin)
  1106. calcru: runtime went backwards from 17333 usec to 6516 usec for pid 1164 (python2.5)
  1107. calcru: runtime went backwards from 1631 usec to 613 usec for pid 1141 (radiusd)
  1108. calcru: runtime went backwards from 5791 usec to 2213 usec for pid 1136 (apcupsd)
  1109. calcru: runtime went backwards from 214 usec to 80 usec for pid 1125 (nfsd)
  1110. calcru: runtime went backwards from 228 usec to 85 usec for pid 1124 (nfsd)
  1111. calcru: runtime went backwards from 233 usec to 87 usec for pid 1123 (nfsd)
  1112. calcru: runtime went backwards from 208 usec to 78 usec for pid 1122 (nfsd)
  1113. calcru: runtime went backwards from 221 usec to 83 usec for pid 1121 (nfsd)
  1114. calcru: runtime went backwards from 221 usec to 83 usec for pid 1119 (nfsd)
  1115. calcru: runtime went backwards from 220 usec to 82 usec for pid 1118 (nfsd)
  1116. calcru: runtime went backwards from 241 usec to 90 usec for pid 1117 (nfsd)
  1117. calcru: runtime went backwards from 250 usec to 94 usec for pid 1116 (nfsd)
  1118. calcru: runtime went backwards from 403 usec to 151 usec for pid 1115 (nfsd)
  1119. calcru: runtime went backwards from 61648 usec to 23176 usec for pid 1114 (nfsd)
  1120. calcru: runtime went backwards from 2211 usec to 831 usec for pid 1099 (mountd)
  1121. calcru: runtime went backwards from 11176 usec to 4201 usec for pid 1068 (amd)
  1122. calcru: runtime went backwards from 911 usec to 342 usec for pid 1068 (amd)
  1123. calcru: runtime went backwards from 2543 usec to 956 usec for pid 1008 (ypserv)
  1124. calcru: runtime went backwards from 9841 usec to 3699 usec for pid 1005 (rpcbind)
  1125. calcru: runtime went backwards from 101965 usec to 38787 usec for pid 974 (named)
  1126. calcru: runtime went backwards from 41773 usec to 15740 usec for pid 900 (syslogd)
  1127. calcru: runtime went backwards from 1836 usec to 690 usec for pid 814 (devd)
  1128. calcru: runtime went backwards from 116730 usec to 43883 usec for pid 814 (devd)
  1129. calcru: runtime went backwards from 88 usec to 33 usec for pid 575 (pfpurge)
  1130. calcru: runtime went backwards from 456 usec to 171 usec for pid 197 (adjkerntz)
  1131. calcru: runtime went backwards from 55363 usec to 21318 usec for pid 59 (sh)
  1132. calcru: runtime went backwards from 3225616 usec to 1220593 usec for pid 59 (sh)
  1133. calcru: runtime went backwards from 1802 usec to 677 usec for pid 58 (schedcpu)
  1134. calcru: runtime went backwards from 1126 usec to 423 usec for pid 57 (softdepflush)
  1135. calcru: runtime went backwards from 3330 usec to 1251 usec for pid 56 (vnlru)
  1136. calcru: runtime went backwards from 977 usec to 369 usec for pid 55 (syncer)
  1137. calcru: runtime went backwards from 150 usec to 56 usec for pid 54 (bufdaemon)
  1138. calcru: runtime went backwards from 4 usec to 1 usec for pid 53 (pagezero)
  1139. calcru: runtime went backwards from 5 usec to 1 usec for pid 52 (vmdaemon)
  1140. calcru: runtime went backwards from 196 usec to 73 usec for pid 51 (pagedaemon)
  1141. calcru: runtime went backwards from 47 usec to 17 usec for pid 50 (sctp_iterator)
  1142. calcru: runtime went backwards from 195 usec to 77 usec for pid 48 (fdc0)
  1143. calcru: runtime went backwards from 149 usec to 56 usec for pid 47 (swi0: sio)
  1144. calcru: runtime went backwards from 1075 usec to 406 usec for pid 39 (em4 taskq)
  1145. calcru: runtime went backwards from 12 usec to 6 usec for pid 38 (em3 taskq)
  1146. calcru: runtime went backwards from 89 usec to 37 usec for pid 37 (em2 taskq)
  1147. calcru: runtime went backwards from 111815 usec to 42120 usec for pid 34 (irq18: uhci2 ehci*)
  1148. calcru: runtime went backwards from 825 usec to 313 usec for pid 27 (em1 taskq)
  1149. calcru: runtime went backwards from 1865 usec to 715 usec for pid 26 (em0 taskq)
  1150. calcru: runtime went backwards from 23362 usec to 8840 usec for pid 24 (irq26: ahd0)
  1151. calcru: runtime went backwards from 138727 usec to 52153 usec for pid 21 (swi6: task queue)
  1152. calcru: runtime went backwards from 13717 usec to 5156 usec for pid 18 (swi5: +)
  1153. calcru: runtime went backwards from 35966 usec to 13585 usec for pid 17 (swi2: cambio)
  1154. calcru: runtime went backwards from 7656 usec to 2892 usec for pid 16 (yarrow)
  1155. calcru: runtime went backwards from 54358 usec to 20547 usec for pid 4 (g_down)
  1156. calcru: runtime went backwards from 37093 usec to 14023 usec for pid 3 (g_up)
  1157. calcru: runtime went backwards from 47289 usec to 17779 usec for pid 2 (g_event)
  1158. calcru: runtime went backwards from 148 usec to 79 usec for pid 15 (swi1: net)
  1159. calcru: runtime went backwards from 100565 usec to 45676 usec for pid 13 (swi4: clock sio)
  1160. calcru: runtime went backwards from 103969445 usec to 39126541 usec for pid 12 (idle: cpu0)
  1161. calcru: runtime went backwards from 103073708 usec to 38794601 usec for pid 11 (idle: cpu1)
  1162. calcru: runtime went backwards from 4761 usec to 1794 usec for pid 1 (init)
  1163. calcru: runtime went backwards from 322446 usec to 121220 usec for pid 1 (init)
  1164. calcru: runtime went backwards from 31719 usec to 11924 usec for pid 0 (swapper)
  1165. splash: image decoder found: logo_saver
  1166. (da0:ahd0:0:0:0): Request Requeued
  1167. (da0:ahd0:0:0:0): Retrying Command
  1168. (da0:ahd0:0:0:0): Request Requeued
  1169. (da0:ahd0:0:0:0): Retrying Command
  1170. (da0:ahd0:0:0:0): Request Requeued
  1171. (da0:ahd0:0:0:0): Retrying Command
  1172. (da0:ahd0:0:0:0): Request Requeued
  1173. (da0:ahd0:0:0:0): Retrying Command
  1174. (da0:ahd0:0:0:0): Request Requeued
  1175. (da0:ahd0:0:0:0): Retrying Command
  1176. (da0:ahd0:0:0:0): Request Requeued
  1177. (da0:ahd0:0:0:0): Retrying Command
  1178. (da0:ahd0:0:0:0): Queue Full
  1179. (da0:ahd0:0:0:0): tagged openings now 64
  1180. (da0:ahd0:0:0:0): Retrying Command
  1181. (da0:ahd0:0:0:0): Queue Full
  1182. (da0:ahd0:0:0:0): tagged openings now 63
  1183. (da0:ahd0:0:0:0): Retrying Command
  1184. (da0:ahd0:0:0:0): Queue Full
  1185. (da0:ahd0:0:0:0): tagged openings now 62
  1186. (da0:ahd0:0:0:0): Retrying Command
  1187. (da0:ahd0:0:0:0): Queue Full
  1188. (da0:ahd0:0:0:0): tagged openings now 61
  1189. (da0:ahd0:0:0:0): Retrying Command
  1190. (da0:ahd0:0:0:0): Queue Full
  1191. (da0:ahd0:0:0:0): tagged openings now 60
  1192. (da0:ahd0:0:0:0): Retrying Command
  1193. (da0:ahd0:0:0:0): Queue Full
  1194. (da0:ahd0:0:0:0): tagged openings now 59
  1195. (da0:ahd0:0:0:0): Retrying Command
  1196. (da0:ahd0:0:0:0): Queue Full
  1197. (da0:ahd0:0:0:0): tagged openings now 58
  1198. (da0:ahd0:0:0:0): Retrying Command
  1199. (da0:ahd0:0:0:0): Queue Full
  1200. (da0:ahd0:0:0:0): tagged openings now 57
  1201. (da0:ahd0:0:0:0): Retrying Command
  1202. (da0:ahd0:0:0:0): Queue Full
  1203. (da0:ahd0:0:0:0): tagged openings now 56
  1204. (da0:ahd0:0:0:0): Retrying Command
  1205. (da0:ahd0:0:0:0): Queue Full
  1206. (da0:ahd0:0:0:0): tagged openings now 55
  1207. (da0:ahd0:0:0:0): Retrying Command
  1208. (da0:ahd0:0:0:0): Queue Full
  1209. (da0:ahd0:0:0:0): tagged openings now 54
  1210. (da0:ahd0:0:0:0): Retrying Command
  1211. (da0:ahd0:0:0:0): Queue Full
  1212. (da0:ahd0:0:0:0): tagged openings now 53
  1213. (da0:ahd0:0:0:0): Retrying Command
  1214. (da0:ahd0:0:0:0): Queue Full
  1215. (da0:ahd0:0:0:0): tagged openings now 52
  1216. (da0:ahd0:0:0:0): Retrying Command
  1217. (da0:ahd0:0:0:0): Queue Full
  1218. (da0:ahd0:0:0:0): tagged openings now 51
  1219. (da0:ahd0:0:0:0): Retrying Command
  1220. (da0:ahd0:0:0:0): Queue Full
  1221. (da0:ahd0:0:0:0): tagged openings now 50
  1222. (da0:ahd0:0:0:0): Retrying Command
  1223. (da0:ahd0:0:0:0): Queue Full
  1224. (da0:ahd0:0:0:0): tagged openings now 49
  1225. (da0:ahd0:0:0:0): Retrying Command
  1226. (da0:ahd0:0:0:0): Queue Full
  1227. (da0:ahd0:0:0:0): tagged openings now 48
  1228. (da0:ahd0:0:0:0): Retrying Command
  1229. (da0:ahd0:0:0:0): Queue Full
  1230. (da0:ahd0:0:0:0): tagged openings now 47
  1231. (da0:ahd0:0:0:0): Retrying Command
  1232. (da0:ahd0:0:0:0): Queue Full
  1233. (da0:ahd0:0:0:0): tagged openings now 46
  1234. (da0:ahd0:0:0:0): Retrying Command
  1235. (da0:ahd0:0:0:0): Queue Full
  1236. (da0:ahd0:0:0:0): tagged openings now 45
  1237. (da0:ahd0:0:0:0): Retrying Command
  1238. (da0:ahd0:0:0:0): Queue Full
  1239. (da0:ahd0:0:0:0): tagged openings now 44
  1240. (da0:ahd0:0:0:0): Retrying Command
  1241. (da0:ahd0:0:0:0): Queue Full
  1242. (da0:ahd0:0:0:0): tagged openings now 43
  1243. (da0:ahd0:0:0:0): Retrying Command
  1244. (da0:ahd0:0:0:0): Queue Full
  1245. (da0:ahd0:0:0:0): tagged openings now 42
  1246. (da0:ahd0:0:0:0): Retrying Command
  1247. (da0:ahd0:0:0:0): Queue Full
  1248. (da0:ahd0:0:0:0): tagged openings now 41
  1249. (da0:ahd0:0:0:0): Retrying Command
  1250. (da0:ahd0:0:0:0): Queue Full
  1251. (da0:ahd0:0:0:0): tagged openings now 40
  1252. (da0:ahd0:0:0:0): Retrying Command
  1253. (da0:ahd0:0:0:0): Queue Full
  1254. (da0:ahd0:0:0:0): tagged openings now 39
  1255. (da0:ahd0:0:0:0): Retrying Command
  1256. (da0:ahd0:0:0:0): Queue Full
  1257. (da0:ahd0:0:0:0): tagged openings now 38
  1258. (da0:ahd0:0:0:0): Retrying Command
  1259. (da0:ahd0:0:0:0): Queue Full
  1260. (da0:ahd0:0:0:0): tagged openings now 37
  1261. (da0:ahd0:0:0:0): Retrying Command
  1262. (da0:ahd0:0:0:0): Queue Full
  1263. (da0:ahd0:0:0:0): tagged openings now 36
  1264. (da0:ahd0:0:0:0): Retrying Command
  1265. (da0:ahd0:0:0:0): Queue Full
  1266. (da0:ahd0:0:0:0): tagged openings now 35
  1267. (da0:ahd0:0:0:0): Retrying Command
  1268. (da0:ahd0:0:0:0): Queue Full
  1269. (da0:ahd0:0:0:0): tagged openings now 34
  1270. (da0:ahd0:0:0:0): Retrying Command
  1271. (da0:ahd0:0:0:0): Queue Full
  1272. (da0:ahd0:0:0:0): tagged openings now 33
  1273. (da0:ahd0:0:0:0): Retrying Command

Total Paste Views: 1 — Trackback (0) — PermaLink — Remove Paste

Show/HideUpdate the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will not expire by default. If you want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords.

fantasy-obligation